Teledex M100B10, Руководство пользователя

Страница: 10 / 36

Section B
Bluetooth User Instructions
1. Register a Bluetooth-Enabled Mobile
Phone to the M Series Phone
1 .1 In standby mode, press and hold
key for 3 seconds, the Bluetooth LED
will blink and the speaker will generate
a “toot” prompt tone, the terminal then
enters the registration state .
1 .2 The mobile phone turns on Bluetooth
and selects the corresponding
device connection . After successfully
registering, the Bluetooth LED turns off,
returning the phone to standby mode .
Note:
1 . One M Series terminal can
register only one mobile phone .
2 . During the registration, escape
the registration process by taking
the handset off-hook .
2. Deregister the Mobile Phone
In the standby mode, press and hold
key for 3 seconds, the speaker generates
a “toot” prompt tone, the terminal will
automatically delete the registered mobile
phone .
Note: When the mobile phone turns
off Bluetooth or exceeds the supported
distance (range of about 30 ft/10 meters),
the M series terminal will automatically
delete the registered mobile phone within
15 seconds .
3. Play Bluetooth Audio
The mobile phone turns on the music
player . The M Series terminal can carry
out the following operations:
1 . Press
u

to start/stop the play .
2 . Press

to increase the sound volume .
3 . Press

to decrease the sound volume .
4 . Press

to select the previous music,
press

to select the next music .
Note: During the play, the Bluetooth LED
automatically blinks .
4. How to Use a Bluetooth Phone
4 .1 Placing a Call by Bluetooth
Placing a Call: Lift the handset and
press key, the Bluetooth LED lights
up . The handset receiver generates the
dial tone and you can dial the telephone
number . The mobile phone will
automatically dial out the number after
3 seconds or you can directly press #
key to start dialing out .
4 .2 Receiving a Call by Bluetooth
When the mobile phone rings, lift the
handset and press key to answer
the call .
5. Set the Name of the M Series Phone/
Bluetooth Device
In the standby mode, press
* # 2 8 <name>
* # . The <name> only supports numerals up
to 8 digits .
Example: Pressing * # 2 8 2222 * # would
change the name of the M Series bluetooth
interface to 2222 .
10 www.teledex.com
M SERIES ANALOG CORDED USER GUIDE