DIAMOND Elite DIAGRAM
DATA PORT
MESSAGE WAITING
REDIAL
HANDSET VOLUME
MUTE
HOLD
LINE 1
LINE 2
CONFERENCE
SPEAKER PHONE
STORE
FLASH
AUTO DIAL KEYS
AUTO DIAL KEYS
(L2S-10E only)
RING VOLUME
6. Insert the top two retaining tabs of the mounting brackets into the mounting bracket slots (located near the middle of
the telephone). Then firmly push down to insert the retaining tabs on the opposite side of the mounting bracket.
7. Connect a short modular line cord into the jack on the back of the phone (labeled TO TEL). Route the line cord
throughout the line cord channel. Connect the other end of line cord to the phone jack on the wall mounting plate.
8. Turn the telephone over, and slide the phone down onto the mounting posts in downward direction. Both eyelets
should line up with the mounting posts.
9. Complete the wall mounting by installing the handset and handset cord.
