RECEIVING A CALL
An audible ring and flickering red LED indicate an inbound call.
Using the handset
1. Lift the handset. The Elite will select the ringing line
2. To end the call hang up by replacing the handset.
Using the Speakerphone
1. With the handset in the cradle press the line key associated with the ringing line. The Elite will go off hook answering
the ringing line with the speakerphone active.
OR
Press the SPEAKER key. The elite will select the ringing line and answer with the speakerphone active.
Note: The red SPEAKER LED will indicate that the speakerphone is active.
USING THE CONFERENCE KEY
The CONFERENCE key allows the user to originate or include two parties in a three-way phone conversation. Typical
conference calls would be initiated by;
-User initiates two (2) calls
-User initiates one (1) call after receiving a call
-User includes two (2) callers
User Initiates two (2) calls:
1. Place call to first party.
2. Place the first party on hold.
3. Place call to second party.
4. Press the CONF key. The callers will be connected.
User Initiates one (1) call:
1. Receive call from first party.
2. Place caller on hold.
3. Place call to second party
4. Press the CONF key. The callers will be connected.
User includes two (2) callers:
1. Receive call from first party, put on hold.
2. Receive call from second party.
3. Press the CONF key. The callers will be connected.
ADJUSTING SPEAKERPHONE VOLUME
Locate the slide switch (labeled SPKR VOL) on the right side of the telephone.
To increase speaker volume, slide the switch towards the back of the telephone.
To decrease speaker volume, slide the switch towards the front of the telephone.
