ADJUSTING THE RING VOLUME
Locate the adjustment controls on the back of the telephone labeled RINGER LOW/HI (see diagram on page 6). Slide
the switch to the desired LOW or HI ring volume for each line.
SPEAKERPHONE TIPS
To Activate the handset from speakerphone mode:
1. Lift the handset.
2. The red SPEAKER LED will go out.
To Activate the Speakerphone from handset mode:
1. Press the SPEAKER key.
2. The red SPEAKER LED will indicate speakerphone selection.
3. Hang up the handset.
USING THE HOLD KEY
The HOLD key places the call on hold locally at the Elite telephone.
To Place a call on hold
1. With a call active press the red HOLD key.
2. The red line LED will change to a slow blink indicating the call is on hold.
To Remove a call from hold
1. Press the line key of the call on hold. This will remove the call from hold making the call activate on either speaker-
phone or handset.
2. The red line LED will return to steady in-use condition.
To change phones after placing a call on hold
1. Place the call on hold at the Elite.
2. Pickup the call at another telephone. The Elite will detect the pickup and remove the hold condition at the original
Elite.
USING THE MUTE KEY
To mute speakerphone and handset calls:
Press the MUTE key, the red LED below the MUTE key will light. The party on the other end will not hear you when
the MUTE key is depressed. Press the MUTE key again to turn off the mute feature, the MUTE LED will go out.
