9
light begins flash at the same time, it means enable the handset register mode, the
“
ON/OFF
”
instruction light flashes at the same time, if the handset register to the
base is successful, then the
“
charge
”
instruction light on the base and the
“
ON/OFF
”
instruction light on the handset will stop flickering, and will give the prompt tone for
successful registration.
Note: Each base phone can most register 5 handsets.
2.2.5 Delete handset
Keep pressing the
“
FLASH
”
key on the base unit for three seconds, the Speaker
will give
“
beep
”
sound, then
Press
“
0
”
on the base unit to delete all the handset.
Press
“
1
”
on the base unit to delete the first handset.
Press
“
2
”
on the base unit to delete the second handset.
Press
“
3
”
on the base unit to delete the third handset.
Press
“
4
”
on the base unit to delete the fourth handset.
Press
“
5
”
on the base unit to delete the fifth handset.
After pressed the number keys, Charge indicator light will flashes, which means
the handset is being deleted by the phone. When Charge indicator light stops
flashing, it means that the deletion is finished.
2.2.6 Call forward
Choosing the
“
forward type
”
of the
“
Advanced Sip Setting
”
(the default option is
“
OFF
”
). Choose one of the three types which contain always, busy and no answer
to realize call forward.
2.2.7 Three way conference call
2.2.7.1 Three way conference call of the handset
1) Choosing the
“
Enable Three Way Call
”
of
“
Call Service Setting
”
(the default
option status of the phone), suppose the user of the E103IP phone is A, and if user
B calls user A through VoIP phone, user B needs to make 3-way conference call with
user A and C, then user A can use the second line to call user C, the call
auto-maintain with user B, during the conversation with C, pressing down
“
*
”
, then
can make 3-way conference call.
2) Choosing the
“
Enable Three Way Call
”
of
“
Call Service Setting
”
(the default
option status of the phone), suppose the user of the E103IP phone is A, and if user
B calls user A through VoIP phone, user B needs to make 3-way conference call with
user A and C, then user A can use the second line to call user C, the call
auto-maintain with user B, during the conversation with C, pressing down
“
Conf
”
,
then can make 3-way conference call.
2.2.7.2 Three way conference call of the base unit
Choosing the
“
Enable Three Way Call
”
of
“
Call Service Setting
”
(the default
option status of the phone), suppose the user of the E103IP phone is A, and if user
B calls user A through VoIP phone , user B needs to make 3-way conference call with
user A and C, then user A can use the second line to call user C, the call
auto-maintain with user B, during the conversation with C, pressing down
“
*
”
can
make 3-way conference call.
