Teledex E103IP RediDock Скачать руководство пользователя

Страница: 17 / 41

Proxy Username:

proxy server username;

Proxy Password:

proxy server password;

Domain Realm:

SIP domain, enter the SIP domain if any, otherwise

E103-IP will use the proxy server address as SIP domain.

Local SIP port:

Local SIP register port, default 5060;

Phone Number:

Phone number of your SIP account;

Enable Register:

Enable/Disable SIP register.E103 IP won

’

t send register info

to SIP server if disable register.

Message Waiting Indication

：

Set Disable/Enable message waiting through

pull-down menu, including:
Disable

：

MWI is disabled, even if received NOTIFY message from the server

indicating new voicemail, phone will not prompt.

；

Enable (Subscribe): MWI is enabled and SUBSCRIBE will be sent, if the server

sends NOTIFY message indicating new voicemail received, MWI LED will blink to
prompt.

Enable(No Subscribe)

：

MWI is enabled, but phone will not send SUBSCRIBE, if

the server sends NOTIFY message indicating new voicemail received, MWI LED will
also blink to prompt.

SIP1 Subscribe will still be used in config file: config option

“

”

means

“

Disable

”

“

”

means

“

Enable (Subscribe)

”

“

”

means

“

Enable (No Subscribe)

”

Advanced SIP Setting

Register Expire Time:

will auto configure this expire time as the server recommends if it is different from
the SIP server.

NAT Keep Alive Interval

：

NAT keep alive interval time, the default is 60 seconds;

Forward Type: the type of call forward; (the default is OFF);
OFF: Disable call forward;
Busy: If the phone is busy, it will forward to the appointed phone;

Содержание E103IP RediDock










































Результаты поиска

Содержание E103IP RediDock

Отзывы:

Похожие инструкции для E103IP RediDock

Бренды по названию

Популярные бренды

Teledex E103IP RediDock, Руководство пользователя

Результаты поиска

Содержание E103IP RediDock

Отзывы:

Похожие инструкции для E103IP RediDock

Бренды по названию

Популярные бренды