26
Enable Call Transfer:
Please refer to Value_add_service for detail.
Enable Call Waiting:
Enable/disable Call Waiting
Enable Three Way Call:
Please refer to
Value_add_service
for detail.
Accept Any Call:
If this option is disabled, E103 IP refuses the incoming call
when the called number is different from E103 IP
’
s phone number.
No Answer Time:
no answer call forward time setting.
Black List:
incoming call in these phone numbers will be refused.
Limit List:
outgoing calls with these phone numbers will be refused
3.5.9 Memory Key
This page layout shows the number setting of Voice mail and speed-dial key.
MWI Number: configure the number of picking up voicemail message key.
Memory1~Memory7: configure the number of the speed dial key.
If MWI Number and Memory have disposed the number, presses down the key
which corresponds on the telephone board; the telephone will dial the number
automatically which the key disposed.
Memory Key HdActive: configure the number of the park key. In park1 mode, If a
call is active on either line, press down
“
hold
”
key, execute SD HdActive, calling the
user of this number.
Memory Key HdIdle: configure the number of the park key. In park1 mode, If no
call is active and a line is available execute SD HdIdle, after pressing down
“
hold
”
key;
calling the user of this number.
After call park feature is enabled, Memory Key HdActive and Memory Key
HdIdle configure related parameters; you can carry out park1 function.
3.5.10 MMI Filter
MMI filter is used to make access limit to E103 IP phone.
When MMI filter is enable. Only IP address within the start IP and end IP can access
IP phone.
