background image

Important Safety Instructions 

When using your telephone equipment, basic 
safety precautions should always be followed to 
reduce the risk of fire, electric shock, and injury 
to persons, including the following: 
  1.   Read and understand all instructions. 
  2.   Follow all warnings and instructions marked 

on the product. 

  3.   Unplug the product from the wall outlet 

before cleaning. Do not use liquid cleaner 
or aerosol cleaners. Use a damp cloth for 
cleaning. 

  4.   Do not use this product near water—for 

example, near a bathtub, wash bowl, 
kitchen sink or laundry tub, in a wet 
basement, or near a swimming pool. 

  5.   Do not place this product on an unstable 

cart, stand, or table. The product may fall, 
causing serious damage to the product. 

  6.   Slots and openings in the cabinet and the 

back or bottom are provided for ventilation, 
to protect it from overheating. These 
openings must not be blocked or covered. 
The openings should never be blocked 
by placing the product on the bed, sofa, 
rug, or any other similar surface. This 
product should never be place near or over 
a radiator or heat register. This product 
should not be placed in a built-in installation 
unless proper ventilation is provided. 

  7.   Never push objects of any kind into this 

product through cabinet slots as they may 
touch dangerous voltage points or short 
out parts that could result in a risk of fire 
or electric shock. Never spill liquid of any 
kind on the product. 

  8.   To reduce the risk of electric shock do 

not disassemble this product. Take it to a 
qualified service facility if service or repair 
work is required. Opening or removing 
covers may expose you to dangerous 
voltages or other risks. Incorrect 
reassembly can cause electric shock when 
the appliance is subsequently used. 

  9.   Unplug this product from the wall outlet 

and refer servicing to qualified service 
personnel under the following conditions: 

–  When the power supply cord or plug is 

damaged or frayed. 

–  If liquid has been spilled into the product.
–  If the product has been exposed to rain 

or water. 

–  If the product does not operate normally 

by following the operating instructions. 
Adjust only those controls that are 
covered by the operating instructions, as 
improper adjustment of other controls 
may result in damage and may require 
extensive work by a qualified technician to 
restore the product to normal operation. 

–  If the product has been dropped or the 

cabinet has been damaged. 

–  If the product exhibits a distinct change 

in performance. 

  10.   Avoid using a telephone (other than a 

cordless type) during an electrical storm. 
There may be a remote risk of electric 
shock from lightning. 

  11.   Do not use the telephone to report a gas 

leak in the vicinity of the leak. 

PLEASE SAVE THESE INSTRUCTIONS. 

FCC Interference Information

This device complies with Part 15 of the FCC 
Rules. Operation is subject to the following two 
conditions: 
  1.   This device may not cause harmful 

interference.

  2.   This device must accept any interference 

received, including interference that may 
cause undesired operation.

This equipment has been tested and found to comply 
with the limits for a Class B digital device, pursuant 
to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against 
harmful interference in a residential installation. 
This equipment generates, uses, and can radiate 
radio frequency energy and, if not installed and used 
in accordance with the instructions, may cause 
harmful interference to radio communications. 
However, there is no guarantee that interference 
will not occur in a particular installation.

2 

www.teledex.com

    DIAMOND SERIES USER GUIDE

Содержание DIAMOND SERIES















Отзывы: