Telect GMTXX Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 22

Telect GMTXX Скачать руководство пользователя страница 16

© Telect, Inc., All Rights Reserved, 132152-12 A0
1.509.926.6000 :: telect.com

14

100A/60A Universal Voltage GMT Fuse Panels
With Enhanced Power/Fuse & Bay Alarms

Power

:: HPGMTXX & GMTXX

1.5.2 Single-hole Lug Part Numbers for GMT20 Output Terminals (For #3 Panhead Screws)

The GMT20 output terminals accommodate bare wire up to #16 AWG. If lugs are required, only three with
insulated barrels apply for accommodating #22 - #14 AWG:

• AMP 324608 with a flanged (dog-eared), straight, forked tongue for #22 - #16 AWG

• Burndy TP14-2F with a straight, forked tongue for #16 - #14 AWG

• Burndy TP14-2Z with a flanged, straight, forked tongue, also for #16 - #14 AWG

1.5.3 GMT Fuses

For additional dummy fuses, order part number 132748. For GMT safety (splash/splatter) covers, order part number
116915 for GMT fuses up to 15A. Telect recommends using only UL-recognized supplementary protectors.

GMT Fuse

Part Numbers GMT Fuse

Colored Designation Pin Part No.

.18A Yellow (YEL)

130781

102435-21

1⁄4A Violet (VIO)

100151

102435-2

1⁄2A Red (RED)

004001

102435-5

3⁄4A Brown (BRN)

004008

102435-7

1A Gray (GRY)

100991

102435-8

11/3A White (WHT)

004006

102435-9

11⁄2A White/Yellow (WHT/YEL)

004011

102435-10

2A Orange (ORN)

004002

102435-11

2.5A White/Orange (WHT/ORN)

130783

102435-12

3A Blue (BLU)
3.5A White/Blue (WHT/BLU)

004012

102435-13

130782

102435-14

4A White/Brown (WHT/BRN)

004013

102435-15

5A Green (GRN)

004014

102435-16

71⁄2A Black/White (BLK/WHT)

004010

102435-17

10A Red/White (RED/WHT)

004015

102435-18

12A Yellow/Green (YEL/GRN)

102287

102435-19

15A Red/Blue (RED/BLU)

102288

102435-20

20A White/Green Without Safety Cover
(WHT/GRN)

127240RC

20A White/Green With Safety Cover
(WHT/GRN)

131340

102435-22

«
...
14
15
16
17
18
...
»

Содержание GMTXX























Отзывы:

Нет отзывов