Telect BCS II SIMPLEX Скачать руководство пользователя страница 17

Страница: 17 / 17

Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52
www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 117209-1 A0

Page 14

Material Authorization (RMA) before returning equipment. Call a Customer Service
Representative for help getting these forms.

The processing fee guarantees a repair estimate and is credited against actual material and
labor costs.

4.1.5 Repacking For Shipment

1. Tag the equipment with owner’s name, address, and telephone number, together with a

detailed description of the problem.

2. Use the original shipping container if possible. If you do not have it, package the equipment in

a way to prevent shipping damage. Include the RMA inside the container and legibly print the
RMA number on the outside of the package, near the shipping address.

3. Insure the package.

NOTE:

Telect is not liable for shipping damage.

Содержание BCS II SIMPLEX


















Результаты поиска

Содержание BCS II SIMPLEX

Отзывы:

Похожие инструкции для BCS II SIMPLEX

Бренды по названию

Популярные бренды

Telect BCS II SIMPLEX, Руководство пользователя

Результаты поиска

Содержание BCS II SIMPLEX

Отзывы:

Похожие инструкции для BCS II SIMPLEX

Бренды по названию

Популярные бренды