2
WARRANTY
LIMITED WARRANTY
TELECRANE guarantees that this product meets its published specifications at the time of shipment
from the factory. Under proper installation it should work as expected. However, TELECRANE cannot
guarantee that operation in TELECRANE system is absolutely error-free, or without interruption.
Warranty period
This equipment is warranted against defects in material and manufacturing for a period of one year
from the date of shipment. During the warranty period, TELECRANE is responsible for necessary repairs
as long as the product can be proven to be defective.
For warranty service or repair this product must be returned to the service facility designated by
TELECRANE. Buyer will pay shipping charges to TELECRANE while TELECRANE will bear return shipping
charges.
Excluded Items
This warranty does not include consumable parts such as batteries, fuses, buttons, and relays. Also this
warranty does not cover failure or damage resulting from misuse, accident, unauthorized modification,
unsuitable operating environment, natural disasters, improper software setting or improper
maintenance.
Limitation of liability and remedy
If your TELECRANE product fails to work as warranted above, TELECRANE maximum liability under this
limited warranty is expressly limited to the lesser of the price you have paid for the product.
TELECRANE disclaims any liability as a result of any direct/indirect, special, incidental or consequential
damages.
Remarks
No other warranty is expressed or implied, except for the above mentioned.
Any use of this remote
control product would be regarded the same as agreed to all clauses within this user manual.
ATTENTION
Please carefully read the manual before installing and operating this device.
Due to the complex nature of this equipment, it is necessary to read the entire manual before
installation.
The equipment has been stringently tested for quality assurance before delivery from factory.
However, it must not be used in extremely dangerous situations, or where damage may result.
After operation, shut off crane main power, receiver power, and remove transmitter key.
After operation, by pressing “STOP” pushbutton switches off receiver unit then keeping the
transmitter in a safe place when not in use to avoid any unintentionally operation.
The crane should be equipped with main power relay, limit switch and other safety devices.
Do not use this device during electrical storm or where there are conditions of high electrical
interference.
