The CHIME Tab
The second tab is used to set the chime volume.
Use the cursor to adjust the volume from 0 (silent) and 10 (maximum).
This slider also sets the volume at which audio messages stored on the
memory card are broadcast.
Pressing the Default Setting key
sets the volume automatically to 5.
The LOUDSPEAKER Tab
The third tab is used to adjust the monitoring loudspeaker volume.
Use the cursor to adjust the volume from 0 (silent) and 10 (maximum).
Pressing the Default Setting key
sets the loudspeaker volume to 5.
The Mute key is used to switch the loudspeaker on
or off
.
Press the
key to save any changes you have made in the
VOLUME
menu and exit.
Press the
key to exit the menu without saving any changes you may have made.
Warning: After 20 seconds of inactivity the console will return back to the zone selection screen and any changes you
may have made will be discarded.
6.1.5
The KEY Menu
Access to the programming menu is password-protected; the 4 character
password must be entered using the keyboard.
The password is left empty by default (input either 4 spaces or leave blank).
Press the
key to confirm the password and access the Console menu.
Should an error occur, the screen defaults back to the zone selection screen.
Press the
key to return straight away to the zone selection screen.
The console will in any case automatically return back to the zone selection
screen after 20 seconds of inactivity.
The soft key programming screen shows:
- the soft key that is being configured (in this case
SOFT KEY Number 01
).
The keys at the bottom of the screen may be used to scroll through the soft
keys. The same keys can be used to scroll through the programs for soft keys
1 through 64 (according to the console model) and the General Announcement
soft key.
-
Key
: shows the function associated with the soft key. There are three
possible options:
•
None:
the soft key has either not been programmed or is not intended
for switching a zone or group of zones,
•
Number:
a key number is assigned to the soft key. Depending on how
it has been configured, the host system will make the link between
the key number and the zone or group of zones to switch,
•
General Announcement:
assigns the general announcement function
to the soft key.
If the Number function is selected, a new selection zone is displayed to
choose the key number;
-
Label
: provides the descriptive text - up a 16 characters – that will appear on
the soft key in the zone selection screen;
-
Message
: links the broadcasting of a particular message located on the
memory card to a soft key:
Specialisten in communicatie
www.telecomsystems.nl
Tel. +31 (0)10-2660111
Touch screen
microphone consoles
GXT 4000
