The DISPLAY Tab
The fourth tab is used to change the style in which the zone selection screens
are displayed. Use this to switch between display modes 1 and 2, as well as
select and arrange the function keys in each mode.
Display mode :
Press on the display mode button
to switch to mode 1 or on display
mode button
to switch to mode 2.
Configuring the function keys:
The 5 function keys may be configured in either display mode. Each key may
be assigned one of five functions (Cancel
, General
Announcement
, Play message
, Microphone announcement
or Chime
), or the key’s function may be deactivated
. In this case the
operator can only see and may only use those functions that have been
programmed.
Thus there may be anything from 0 to 5 keys visible, and each key
programmed with one of any of 5 possible functions.
sets the display to use display mode 2 with
The Default Setting key
all 5 functions available.
The LANGUAGE Tab
The console interface language may be set using the Language tab. There are
4 languages to choose from: English, French, German and Spanish.
Pressing the Default Setting key
sets the console to French.
Pressing on the Language box displays a selection dial showing the different
languages available.
The AUDIBLE KEY Tab
The sixth tab is used to select the sound emitted to indicate a key press has
been registered by the touch screen. There are 6 possible options: None,
Beep n° 1, Beep n° 2, Beep n° 3, Beep n° 4 and Beep n° 5
.
Beep n° 5 is in fact the console’s built-in buzzer, while the sounds produced by
Beeps 1 to 4 are played back on the monitoring loudspeaker. The audible key
volume can be adjusted using the slider on the right of the screen. Press Play
to listen to the selected sound and volume.
sets the audible key sound to
Pressing the Default Setting key
beep n° 2.
Specialisten in communicatie
www.telecomsystems.nl
Tel. +31 (0)10-2660111
Touch screen
microphone consoles
GXT 4000
