...
continuous
sound
1
2
EXAMPLE OF USE
Device commands: Home page ► Rooms ► select room ► select device command
Feedback
(tap to ask)
Feedback
(tap to ask)
Feedback
(tap to ask)
Feedback
(tap to ask)
Tap to go to
next preset
level
Keep
to dim
UP
Keep
to dim
DOWN
Tap to go to
next preset
level
Keep
to dim
UP
Keep
to dim
DOWN
14.2 MEMORIZATION
For its proper functioning the T-Mate transmitter must be memorized in the controlled receiver.
Refer to instruction manual of the receiver for the procedure of memorization.
Daisy transmitter
MEMORIZATION
T-Mate transmitter
14.3 REMOTE MEMORIZATION OF OTHER RADIO CODES FROM STANDARD TRANSMITTER
Note:
The button P3 is located inside the standard transmitter. The added radio code will have the same functions as the code used for memorization.
This procedure is compatible with any type of transmitter.
1 s
P3
New
< 5 s
continuous
sound
Memorized
< 5 s
Memorized
Standard transmitter
Press button
P3
of the
memorized
standard transmitter and hold. The buzzer emits a continuous sound. Press
a button relative to an
already memorized
code. The buzzer stops for 1 second and then starts the continuous
sound again. Press the virtual button on the Daisy transmitter relative to the
new
code to be memorized. Successful
memorization is indicated by the intermittent sound of the buzzer.
REMOTE MEMORIZATION OF OTHER RADIO CODES FROM STANDARD TRANSMITTER
Note:
The button P3 is located inside the standard transmitter. The added radio code will have the same functions as the code used for memorization.
This procedure is compatible with any type of transmitter.
1 s
P3
New
< 5 s
continuous
sound
Memorized
< 5 s
continuous
sound
Standard transmitter
T-Mate transmitter
Device commands can be found in the created rooms (1) or in the “favourites” list (2). If the associated receivers
belong to Blue Series (bidirectional technology), the status will be displayed aside.
Memorized
EXAMPLE OF USE
Device commands: Home page ► Rooms ► select room ► select device command
Feedback
(tap to ask)
Feedback
(tap to ask)
Feedback
(tap to ask)
Feedback
(tap to ask)
Tap to go to
next preset
level
Keep
to dim
UP
Keep
to dim
DOWN
Tap to go to
next preset
level
Keep
to dim
UP
Keep
to dim
DOWN
14.2 MEMORIZATION
For its proper functioning the T-Mate transmitter must be memorized in the controlled receiver.
Refer to instruction manual of the receiver for the procedure of memorization.
Daisy transmitter
MEMORIZATION
T-Mate transmitter
14.3 REMOTE MEMORIZATION OF OTHER RADIO CODES FROM STANDARD TRANSMITTER
Note:
The button P3 is located inside the standard transmitter. The added radio code will have the same functions as the code used for memorization.
This procedure is compatible with any type of transmitter.
1 s
P3
New
< 5 s
continuous
sound
Memorized
< 5 s
Memorized
Standard transmitter
REMOTE MEMORIZATION OF OTHER RADIO CODES FROM STANDARD TRANSMITTER
Note:
The button P3 is located inside the standard transmitter. The added radio code will have the same functions as the code used for memorization.
This procedure is compatible with any type of transmitter.
1 s
P3
New
< 5 s
continuous
sound
Memorized
< 5 s
continuous
sound
Standard transmitter
T-Mate transmitter
Device commands can be found in the created rooms (1) or in the “favourites” list (2). If the associated receivers
belong to Blue Series (bidirectional technology), the status will be displayed aside.
Memorized
