Teleco TeleSat S65, Руководство по установке и инструкция пользователя

Страница: 11 / 28

Connections
Black
Grey
Sat Receiver or
Television with Sat
Receiver
not supplied
WARNING :
The 3-way power connector (P)
must only be inserted in the
12 Vdc POWER socket .
Inserting this connector in any
other socket will cause
irreparable damage to the board
and render the
warranty null
and void.
4) The GREEN safety cable of the Control Unit must be
connected to the consensus of the vehicle startup console (in
many cases such consensus is located on Pin 15 in the main
terminal board). In this way, whenever the motor is started,
this cable receives a po 12 Vdc voltage, which will
automatically lower the antenna and lock all functions of the
Control Unit simultaneously.
1) Connect the grey cable (motors) to the MOTOR
UNIT connector and the Black coaxial cable
(antenna) to the LNB connector of the Control unit.
2) Connect the Receiver or the TV with Receiver
to the SAT RECEIVER connector. You can connect
any satellite receiver.
3) Connect directly the BLACK cable of the Control unit to the NEGATIVE
POLE of the vehicle 12 Volt Battery, and the RED cable to the POSITIVE
POLE + (remember not to mix the + and - poles up), using 2 cables of
a cross section of 2.5 mm².
Green
Grey
9