TH-EU KVM Extender
38
2012-02-27
5
Configuration
Pos : 31 /806-IHSE/Konfig urati on/Übertr agungs parameter /472- xx @ 6\mod_1304494757555_6.doc @ 50488 @ 2
5.1
Transmission Parameters
In default configuration, the device adapts dynamically to monitor
resolution and image content. This configuration is suitable for almost all
conditions and should only be modified if image quality is not fully
satisfactory.
Pos : 32 /806-IHSE/Konfig urati on/Geräteeinstell ung en/472- xx @ 6\mod_1305032093070_6.doc @ 51594 @ 3
5.1.1
Device Settings
Both CPU unit and CON unit have four DIP switches that are used to set
the KVM Extender to the respective operation mode, depending from the
respective device.
DIP settings have to be performed both CPU and CON unit into the same
positions.
DIP
Function
Switch
Position
Switch down
Switch up
Not used
Single Link mode
(default in combination with Single Link devices)
Dual Link mode
(default in combination with Dual Link devices)
Operation with switching function
(default in combination with models with integrated switching
function)
Operation with USB-HID / analog audio / serial, no HDCP
possible (default in combination with USB-HID / analog
audio / serial devices)
Operation with HDCP, no USB-HID / analog audio / seriell
possible (default with USB 2.0 devices without analog
audio / serial)
By operation with HDCP the transmission of USB-HID and analog audio
signals is blocked.
Pos : 33 /806-IHSE/Konfig urati on/Kommando-M odus/472- xx @ 6\mod_1304494974336_6.doc @ 50524 @ 2
