Model 458-CC-16/458-CM (16-Slot Chassis & Control Module) Rev I
Page 9
4.0 IEEE Connections & Commands
Connections
The Model 458-CM is completely controllable from an IEEE 488.1 (488.2) source. The
following section explains the connections and controls necessary for IEEE operation.
Figure 3 IEEE 24-pin Connector
Connect a standard IEEE cable from the Model 458-CM to the IEEE General Purpose
Interface Bus controller.
User Command Interface
The Model 458-CM is intended to be operated from an IEEE Controller such as a PC equipped
with an IEEE interface board. The set up of your computer and IEEE controller board may be
different depending on the manufacturer of your equipment. Follow the set up instructions
supplied with your equipment.