Model 458-3SL (3-Slot Chassis) Rev A
Page 28
Set Baud Rate for Transceiver Using the DeviceInstaller
1. Select the
Serial Settings
option on the left side of the screen under Channel 1. The Serial
Settings screen appears.
2. Select the desired Baud Rate from the Port Settings section. Click
OK
. The message “
Done!
”
is displayed to the right of the OK button at the bottom of the screen. When this message
disappears, click
Apply Settings
on the left-side menu bar. A message appears indicating the
settings are being saved and a progress bar is shown. When the update to the transceiver is
complete, the Device Server Configuration Manager screen is displayed.
