Products Covered By This Installation Guide
The TeleAdapt PowerHub Mini (TA-7541U) is a furniture power
distribution unit which provides a universal power socket and 2
USB charging sockets (1 x USB Type-C
TM
that can charge up to
5V/3A and 1 x USB Type A that can charge up to 5V/2.4A).
The TA-7541U is provided with 2 trims (Slimline black and Slimline
metallic) and a detachable country specific power cord.
Installation is simple as the TA-7541U only requires a single
connection to a power outlet (120V-240V), so fitting can be
undertaken by anybody who has a screwdriver and does not
require a qualified electrician.
IMPORTANT NOTE: The TA-7541 does NOT convert the mains
voltage.
PowerHub Mini Part Numbers
TA-7541U-UKN3
Slimline trim, soft-touch black, 3.5M UK cord
TA-7541U-UKWN3
Slimline trim, soft-touch white, 3.5M UK cord
TA-7541U-EUN3
Slimline trim, soft-touch black, 3.5M EU cord
TA-7541U-EUWN3
Slimline trim, soft-touch white, 3.5M EU cord
TA-7541U-JPN3
Slimline trim, soft-touch black, 3.5M Japan
cord
TA-7541U-JPWN3
Slimline trim, soft-touch white, 3.5M Japan
cord
2
Important Safety Instructions
•
Read these instructions carefully before attempting any
installation. Follow all instructions and heed all warnings.
These instructions should be kept for future reference.
•
This equipment must be securely attached to furniture in strict
accordance with these installation instructions.
•
This equipment is designed for indoor use only.
•
Only use with attachments and accessories as specified by
the manufacturer.
•
The mains plug used to disconnect this equipment from its
power source must be readily accessible at all times.
•
Ensure the power cord is uncoiled before installation.
•
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles and the point
where they exit from the equipment.
•
The power cord must be plugged into a mains socket outlet
with protective earthing.
•
Clean only with a dry cloth.
•
Refer all servicing to qualified service personnel. Servicing is
required when the equipment has been damaged in any way,
for example if the power supply plug or cord is damaged,
liquid has been spilled or objects have fallen into the
equipment, the equipment has been exposed to rain or
moisture, does not operate normally or has been dropped or
damaged.
•
Unplug this equipment during lightning storms or when
unused for long periods of time.
•
Do NOT defeat the safety purpose of the grounded plug. If
the provided plug does not fit into your outlet consult a
qualified electrician to replace the obsolete outlet.
•
Do NOT install or use this equipment near water.
•
Do NOT expose this apparatus to rain or moisture.
•
Do NOT expose to dripping or splashing. No objects filled
with liquid such as vases shall be placed on the equipment.
•
Do NOT install near any heat sources such as radiators,
convection heaters or other apparatus such as amplifiers that
produce heat.
•
Do NOT exceed the maximum load of 10 amps.
Approval Information
The internal PSU is ETL listed for the USA and Canada and
conforms to UL1310. It also confirms to FCC Part 15b.
P
o
w
e
rH
u
b
M
in
i
In
s
ta
lla
ti
o
n
G
u
id
e
3
P
o
w
e
rH
u
b
M
in
i
In
s
ta
lla
ti
o
n
G
u
id
e
