TeleAdapt DeskPoint Pro User Manual
Version 12.2011
24
The wireless interface can be enabled or disabled. By default it is enabled.
You can choose one
Band
as follows:
2.4GHz (B): 802.11b supported rate only.
2.4GHz (G): 802.11g supported rate only.
2.4GHz (N): 802.11n supported rate only.
2.4GHz (B+G): 802.11b supported rate and 802.11g supported rate.
2.4GHz (G+N): 802.11g supported rate and 802.11n supported rate.
2.4GHz (B+G+N): 802.11b, 802.11g and 802.11n supported rate.
The default is 2.4GHz (B+G+N) mode.
The DeskPoint Pro can support 4 additional SSIDs. Select this option to enable and configure the basic
wireless settings for each virtual SSID (band, SSID, data rate, broadcast SSID and WMM. You can also
view the active client list for each SSID.
Since the DeskPoint Pro is also IEEE 802.11b and IEEE802.11g compatible, you can configure the
Date
Rate
setting to meet your backwards compatibility needs. If there is RF interference, you may want to
reduce the
Data Rate
for more reliable wireless transmission. In most cases, leave the setting to
Auto
.
The number of available
RF channels
depends on local regulations, The regulatory domain is
determined by the firmware that is loaded. The SSID of a wireless client computer and the SSID of the
DeskPoint Pro must be identical for them to communicate with each other.
Broadcast SSID
:
Enabled; the DeskPoint Pro will broadcast its SSID to stations. And if disabled: This
DeskPoint Pro will not broadcast its SSID to stations. If stations want to connect to this DeskPoint Pro, this
it’s SSID should be known in advance to make a connection.