Tele Radio PN-R15-1, Руководство пользователя

Страница: 74 / 92

RELAY FUNCTIONALITY
NOTE! If Operating mode 0 is selected, you can not make these settings. Contact your representative
for assistance.
NOTE! Momentary relay functionality is default. That means that the relay will only be activated when
you press a button on the transmitter. When the button is released, the relay deactivates. Setting a relay
to latching means that the relay gets activated every time that you press a button, but in this case the
relay remains active until the button is pressed again.
NOTE! Before starting to perform these settings, make sure that the stop relays are deactivated!
NOTE! The settings options depend on the selected Operating mode.
Momentary or latching relay functionality
1. Press the receiver Function button 2 times. LED 9 (yellow) lights. The relay LEDs light.
2. Press the receiver Select button to switch relay functionality. The relay LEDs flash to indicate that a
latching or momentary functionality can be set to the corresponding relays.
3. Press the receiver Function button to set latching or momentary functionality:
LED 9 (yellow) off = momentary relay functionality
LED 9 (yellow) on = latching relay functionality
4. Press the receiver Select button to step to the next available relay. When you have stepped through
all the available relays, the receiver exits the settings menu.
- 24 -