Tele Radio PN-R15-1, Руководство пользователя

Страница: 73 / 92

LOGOUT
NOTE! Only for continuous radio mode.
NOTE! Quick logout can only be made when the transmitter is on and the radio link is up.
Quick logout
1. Press button 7. Keep pressed.
2. Press the stop button.
3. The transmitter is logging out for approx.10 seconds. The transmitter turns off.
Logout from receiver
1. Press the receiver Select button.
LED 10 (orange) lights.
2. Keep pressed (for more than 4 seconds).
LED 10 (orange) goes off.
3. The transmitter is now logged off. Any other registered transmitter can log in.
Logout from menu mode
1. Make sure that the stop button is pressed.
2. Press button 8. Keep pressed.
3. Twist and pull out the stop button.
4. Release button 8.
The top LED flashes (green).
5. WITHIN 1 MINUTE FROM PULLING OUT THE STOP BUTTON:
Enter the code: 1-2-3-4 (press the buttons 1, 2, 3, 4).
LEDs 1- 4 light up (red). If the code is invalid, the transmitter turns off. When the code is accepted, the
top LED flashes (green). LEDs 1-4 flash (red).
6. WITHIN 1 MINUTE FROM ENTERING THE CODE:
Press button 7.
The top LED flashes (red).
7. The transmitter is logging out for approx.10 seconds. The transmitter turns off.
- 23 -