Teldat REGESTA 1, Руководство по установке и настройке

Страница: 25 / 47

Example ATI
Teldat REGESTA 1 (c)2009
GSM/GPRS ROUTER Release 1.2
SCADA IEC-101/102 gateway
OK
Syntax AT&F
Description Loads the factory default configuration in the device.
<n> This is an optional value which allows you to select between the various de-
fault configurations. The 0 value is equivalent to not entering any number. This
can take the values 0 and 1.
Caution
Executing this command means the active configuration is des-
troyed.
Example AT&F
OK
Syntax AT&W
Description The aim of this command is to make certain devices compatible. Although the
function of this command is to save the active configuration, in this device no ac-
tion is executed.
All the commands are automatically saved as they are entered.
Example AT&W
OK
Syntax ATO
Description This command is used to exit the “AT commands” mode in the device and pass to
the “DATA” mode, when this is executed from the serial port (COM).
When this is executed from a remote configuration session (socket 2), the said
session is then closed.
The command function is the same as the AT*ZEXIT command.
Caution
Executing this command can force the device to restore a GPRS or
DATA connection. This happens when a parameter has been modi-
fied in the commands phase and this process needs to be executed
to activate the new configuration.
Example ATO
OK
Teldat S.A.
4 Configuration
REGESTA 1 21