Teldat REGESTA 1, Руководство по установке и настройке

Страница: 14 / 47

This port has a double function where you can configure the device through AT commands as well as transfer data
from the terminal connected to this.
The following picture displays where the serial port connector is located.
The following image shows where the connector is located on the front panel of the device:
Fig. 10:
REGESTA 1 configuration connector
Note
The default configuration for the COM port is as follows:
- Speed: 9600 bps.
- Eight data bits.
- One stop bit.
- EVEN parity.
- No type of flow control.
The speed and parity type can be modified through AT commands.
Connection to the configuration port can be carried out connecting a DB9 Male to a DB9 Female. In cases where the
terminal has DB25 connectors, you will need to use an additional adapter.
2.2 Installing the SIM card
The REGESTA 1 has a Wireless WAN interface which in order to operate requires a SIM card inserted in the device.
Warning
Never install the SIM card when the device is switched on.
When inserting the SIM card, please protect yourself against electrostatic discharges (ESD).
Do not touch the SIM card connectors.
2 Installation Teldat S.A.
10 REGESTA 1