Appendix A Technical Information
A.1 Troubleshooting
The following table can help you solve problems when installing the device. If you cannot resolve the issue, please
contact your dealer for more information.
Symptom
Solution
None of the LEDs lights up on
the router.
Check the power supply to the router (power source, ON/OFF switch, main power
outlet).
You have forgotten the router's
access password.
Ignore the configuration through the RST button (as explained in the relevant sec-
tion).
The
LAN switch
LED never
lights up in green.
Check the Ethernet cable and the connection to the network.
The
Eth WAN
LED never lights
up in green.
Check the Ethernet cable and the connection to the network.
Check the appropriate license is available for use.
The
Wi-Fi
LED never lights up in
green.
Check the router configuration and that of the remote station(s).
Check the appropriate license is available for use.
A.2 Updating the software
The Teldat Connect-KFPlus router can be updated to new versions. Please contact your dealer for further details
on new releases.
There are several ways to update a Teldat router. For further information, please see manual: “Teldat
Dm748-I Soft-
ware Updating
”.
The software required to update Teldat routers is supplied in a format known as distribution, which contains all the
files needed to update your device and in-depth information on their content.
The embedded access point (if available) can also be updated to new versions. Please contact your dealer for further
details on new releases for the embedded access point.
A.3 Connecting to the device
A.3.1 Connecting using the local console (Aux connector)
The Teldat Connect-KFPlus router has a RJ45 female connector on the front panel, known as Aux, which provides
access to the device's local console.
Fig. 14:
Aux Connector
To configure this, you must connect the Aux port to an asynchronous terminal (or to a PC with terminal emulation).
Teldat S.A.
Technical Information
Teldat Connect-KFPlus
21
