Warning
The equipment must be used with the power supply provided by the manufacturer.
Workplace conditions. Main characteristics
• Avoid humid and/or dusty locations.
• Direct exposure to sunlight and other heat sources should be avoided. The device should not be placed amongst
papers, magazines or other elements that could hinder natural air circulation.
• The device should not be placed close to strong electromagnetic fields (such as speakers, engines, etc.).
• Knocks and/or strong vibrations should be avoided during transport, operation and storage.
Warning
3.5.1 Power Source
To avoid electric shocks, residual current circulation and other unwanted effects that affect communications, the fol-
lowing is recommended:
Warning
For safety and EMC purposes, the external power supply must be connected to a grounded power out-
let.
Note
We recommend plugging all interconnected communication devices to the same grounded power out-
let.
3.5.1.1 Connecting
• Make sure the on/off power supply switch is in the OFF position (0).
• Make sure the power supply is NOT connected to the mains or to the device.
• Connect all data cables.
• Connect the external adapter power cable to the device.
• Connect the adapter power cable to the main supply (wall socket).
• Put the device's on/off power supply switch in the ON position (1).
3.5.1.2 Disconnecting
• Put the on/off power supply switch in the OFF position (0).
• Disconnect the adapter power cable from the main supply (wall socket).
• Remove the power supply cable from the device.
• Disconnect the data cables.
3 Components and Power Supply
Teldat S.A.
12
Teldat Connect-KFPlus
The electric current in power cables, telephone lines and communication cables is dangerous. To pre-
vent electric shocks, before installing, handling or opening the equipment covers, connect and discon-
nect the cables following the steps set forth in
on page 12 and
on page 12.
To connect the power supply to the device, please follow the steps set out in
on page 12.
