Teldat C1+LS, Руководство по установке

Страница: 21 / 33

S/N: 706/00122
=== INITIAL MENU ===
a) Set Date and Time
c) Change Code to Run
d) Change Licence
f) Disk menu
l) Load from lan
r) Reset
v) Change version control for loading
w) Reset and break into boot
0) Exit
>>
• The device is now in BIOS mode with the IP configuration established in BOOT (default: IP address 192.168.1.1
and mask 255.255.255.0).
• You can execute a telnet to access the BIOS menu. Once you’ve done that you enter in the BIOS menu:
CIT software version: 10.08.01
Current software license: 22 48
S/N: 706/00122
=== INITIAL MENU ===
a) Set Date and Time
c) Change Code to Run
d) Change Licence
f) Disk menu
l) Load from lan
r) Reset
v) Change version control for loading
w) Reset and break into boot
0) Exit
>>
Accessing the BIOS menu from the console without using the RST button
It’s also possible to access the BIOS menu without using the RST button if you have access to the device’s local
console. Simply access the BOOT menu and, from there, execute the “rb” command. Below you can see an example
of a C1+LS in BIOS mode start up:
CFE> rb
Booting from latest image (0xbe160000) ...
Code Address: 0x80010000, Entry Address: 0x80330000
Booting version 10.08.01
Decompression OK!
Entry at 0x80330000
Closing network.
Closing DMA Channels.
Starting program at 0x80330000
CIT software version: 10.08.01
Teldat S.A.
1 Installing the Router
Teldat C1+LS Router 17