![Teldat C1+LS Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/teldat/c1-ls/c1-ls_installation-manual_1079526017.webp)
CFE version XXXX
Build Date: XXXX
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 67108864 bytes (64MB)
Boot Address 0xbe000000
*** default configuration required ***
Board IP address
: 172.24.251.14:ffff0000
Host IP address
: 172.24.75.193
Gateway IP address
:
Run from flash/host (f/h)
: f
Default host run file name
:
Default host flash file name
:
Boot delay (0-9 seconds)
: 3
Boot image (0=latest, 1=previous) : 1
Board Id (0-0)
: 96358C1PL
Number of MAC Addresses (1-32)
: 4
Base MAC Address
: 22:22:22:22:22:22
PSI Size (1-64) KBytes
: 24
Main Thread Number [0|1]
: 0
*** Press any key to stop auto run (3 seconds) ***
Auto run second count down: 0
Booting from only image (0xbe8a0000) ...
Code Address: 0x80010000, Entry Address: 0x80330000
Booting version 10.08.00-00.00
Decompression OK!
Entry at 0x80330000
Closing network.
Closing DMA Channels.
Starting program at 0x80330000
CIT release: XXXXX
Current software license: 22 48
S/N: 706/XXXXX
........
Default configuration used
Parsing text mode configuration ...
Configuration parsed
Initializing
Press any key to get started
The process itself does not delete any configuration that was previously stored. It just resets the default configura-
tion.
1.4.2 Procedure to force start up in BOOT mode
Follow the steps below if you need to force the device to start up in BOOT mode in order to load/upgrade the C.I.T.
image from BOOT. For further information on how to do this in BOOT mode, please see the manual on software up-
grading (Dm748-I).
• Turn off the device through the ON/OFF switch.
Teldat S.A.
1 Installing the Router
Teldat C1+LS Router
13