This initial configuration allows you to access the device's configuration console through the Telnet IP protocol. To do
this, follow the instructions below:
• Assign the IP terminal (normally a PC) Ethernet interface with an IP address in
the [192.168.1.2, 192.168.1.254] range and with a mask of 255.255.255.0. For
example, 192.168.1.2, 255.255.255.0.
• Connect the IP terminal Ethernet interface to the Regesta PRO PLC LAN con-
nector through the Ethernet cable (RJ45) provided.
• Initiate a Telnet session from the IP terminal to IP address 192.168.1.1
(Regesta PRO PLC default address).
• The default configuration does not ask for credentials (user/password) to ac-
cess the console.
A.3 Connectors
A.3.1 LAN connector
RJ45 LAN
RJ45 PIN
LAN
1
2
3
4
5
6
7
8
Tx+ (input)
Tx- (input)
Rx+ (output)
--
--
Rx- (output)
--
--
A.3.2 WWAN/Cell connector (female)
RF
PIN
ANT
Internal
External
RF in/out
GND
Technical information
Teldat S.A.
26
Regesta PRO PLC
