elmeg IP140 / en / elmeg140_v1 / web_configurator.fm / 09.04.2014
V
e
rsion 2, 27.0
5
.2010
121
elmeg IP140
bintec elmeg
Configuring phone settings via the Web configurator
De-registering a DECT device
¤
Click on
OK
next to
Deregister DECT device
to de-register a device connected via DECT.
Activating/deactivating Eco Mode
Your elmeg IP140 is equipped with the environmentally friendly Eco Mode+ for DECT operation.
When you activate
Eco Mode+
, the radiation (DECT transmission power) of the phone in idle
status is switched off.
¤
Activate or deactivate the
Eco Mode+
option.
The DECT icon
¼
appears in the display in green if
Eco Mode+
is activated.
Saving settings
¤
Click on
Save
to save your settings on the
DECT
screen.
Telephony
menu provides the following setting options:
u
This is where you can configure your VoIP connections and establish new connections.
u
On this screen you can optimise the voice quality of your VoIP connections.
u
On this screen you can define options for call divert and activate or deactivate this function.
u
The Dialling Plans screen is where you can define the use of area codes and VoIP connections
for outgoing phone calls and enter the international and local area code for your phone con-
nection.
u
You can use the blacklists to block incoming calls from selected numbers and also to block
all anonymous calls.
u
This is where you define where recordings of conversations are saved.
u
On this screen you can configure your network mailbox.
