elmeg IP140 / en / elmeg140_v1 / starting.fm / 09.04.2014
V
e
rsion 2, 27.0
5
.2010
13
elmeg IP140
bintec elmeg
First steps
Setting up and connecting the device
The phone is designed for use in dry rooms in a temperature range of ±0°C to +45°C.
¤
Set up the phone at a central point where a connection to the local network is available.
Firmware update
Whenever there are new or improved functions for your bintec elmeg, firmware updates are
made available for you to download to your phone (
). If this results in operational
changes to your phone, a new version of this user guide or the necessary amendments are
published on the Internet at www.bintec-elmeg.com.
Select the product to open the relevant product page for your telephone, where you will find
a link to the user guide.
To find out what version of firmware is currently loaded on your phone, see
.
Please note
The following conditions must be observed:
u
If you want to establish a wireless connection using DECT, pay attention to the range of the
base station. This is up to 300 m in unobstructed outdoor areas and up to 50 m inside build-
ings.
u
If you wish to establish a connection with the local network using WLAN, please ensure that
the device is within range of the access point.
Warning
u
Never expose the elmeg IP140 to the following:
heat sources, direct sunlight or other electrical appliances.
u
Protect your bintec elmeg from moisture, dust, corrosive liquids and fumes.
