elmeg IP140 / en / elmeg140_v1 / web_configurator.fm / 09.04.2014
V
e
rsion 2, 27.0
5
.2010
133
elmeg IP140
bintec elmeg
Configuring phone settings via the Web configurator
Voice mail services
Some VoIP providers offer answering machines on the network – network mailboxes. These
accept incoming calls on the corresponding VoIP phone number. You can access voice mails on
the network mailbox via the display menu (
To record all calls, set up a network mailbox for each of your VoIP accounts.
Settings
¢
Telephony
¢
Voicemail Services
¤
Enter the
Mailbox Number
for the VoIP connection and activate the network mailbox.
¤
Click on
Save
to save the settings.
Messaging
The
Messaging
menu provides the following setting options:
u
This is where you enter the data for your e-mail account so that you can receive your e-mails
on the phone.
u
On this screen you can configure the behaviour of the Message Centre key (MWI = Message
Waiting Indication).
Your phone will notify you when new e-mail messages have been received on your incoming e-
mail server. You can use your phone to connect to the incoming e-mail server and display the
sender, date/time of receipt, subject and body of the message for every e-mail message in the
incoming e-mail list.
Prerequisites:
u
You have set up an e-mail account with an ISP.
u
The incoming e-mail server uses the POP3 protocol.
u
You set up the name of the incoming e-mail server and your personal registration data
(account name, password).
If you have already entered the data in the setup assistant, you can change it here.
