Telcoma Automations EDGE20, Инструкции по эксплуатации и программированию

Страница: 35 / 64

GB GB
DESCRIPTION OF COMPONENTS
Fig. 1
1 channel decrease key
2. CH1 transmission key
3. channel increase key
4. CH2 transmission key
5. CH3 transmission key
MAIN FUNCTIONS
Fig. 2
Battery panel opening and
external dimensions in mm
This transmitter can control up to 20 automations, each of which can be
sent 3 different functions (for example OPEN, CLOSE and STOP).
To scroll through the 20 channels, press key 1 (to decrease the number) or
3 (to increase the number).
After selecting the channel, press keys 2, 4 or 5 to transmit the code.
To memorise the code in the user, read the receiver instructions.
Press and hold the the keys indicated in the drawing (1 and 3)
until starts to flash.
-Raggruppamento canali (C1, C2).
Use this menu to group channels as required. Once configured, press a
command for C1 or C2 to transmit all selected channels in sequence.
Example: how to group channels 02 and 15 in C2
SPECIAL FUNCTIONS
Use key 1 or 3 (indicated in the drawing) to scroll through to the
flashing
Use the central key to confirm
The channel will start flashing.
Use key 3 (indicated in the drawing) or 1 to scroll through the
channels to
Press key 2 to add the channel 02 to C2. The dot next to 2 will light
up ( ).
To remove it from C2 press key 4, and the dot next to 2 will turn off
( ).
If a dot is lit next to 0 ( ), this means that channel 02 also
belongs to group C1.
Use key 3 (indicated in the drawing) or 1 to scroll through the
channels to
Press key 2 to add the channel 15 to C2. The dot next to 5 will light
up ( ).
To remove it from C2 press key 4, and the dot next to 5 will turn off.
34 35