Telair Energy 2510G Скачать руководство пользователя страница 25

                                                                                                                                   

 

Vers. 001

 

Energy 2510 G

 

25

GB

NOTES: (1) Clean more frequently if you use it in a very dusty environment

.

 

 

(2) These operations must be performed by specialised personnel only. 

 

 
 
 
 

 
 
 
 

9   PROLONGED INACTIVITY 

 
 

 

 

 

When the generator remains idle for at least three weeks, old unleaded 
petrol sediments could build up inside the carburettor. These sediments 
can seriously damage the engine and it is therefore COMPULSORY that 
the carburettor be completely emptied prior to a long period of non-use: 
do this by turning off the fuel tap and running the generator set until it 
stops. 
It is also essential that you never use old unleaded petrol, as it can 
undergo chemical modifications and seriously damage the engine. 
Failure to observe these instructions automatically renders the 
WARRANTY NULL AND VOID. 

 
 
 
 

10   DISMANTLING 

 
Should you have to dismantle the generating set, 
contact specialised companies. 
 
 
 

 

 

11   RECOMMENDED FIRE-FIGHTING 
EQUIPMENT 

 
In case of fire, never open the generating set 
casing and use only approved type fire 
extinguishers. 
 
 

 

Never use water to put 

out flames in the generating set. 
 

 

 

Содержание Energy 2510G









































Отзывы: