www.tekvox.com
TekFlex-16
79201 User Manual
5.1.2 EDID Learning
•
The Matrix Switcher features EDID management to maintain compatibility between all devices.
•
One input port learns the EDID data of one output port
•
Operation:
“EDID”+“INPUT”+““ENTER”.
•
Example: Input 1 learns EDID data from output 10.
•
INPUT
：
OUTPUT
：
•
All input ports learn EDID data from one output port
•
O
peration: “EDID”+“ALL”+““ENTER”
•
Example: All input ports learn EDID data from output 6
•
OUTPUT
：
5.1.3 Inquiry
Press and hold the button
“
ENTER
”
for 3 seconds to enter system inquiry mode. The chart below
shows information that can be inquired:
Function Items
Description
Example
Check customer
serial
Interface shown after entering
inquiry mode, customer serial can
be changed via RS232 command.
Check output
resolution
In inquiry mode, press output
channel to check its resolution
Correspondence
between inputs and
outputs
“
OUTPUT
”
+
“
ENTER
”
5.1.4 Clear Operation
Function: clear the previous operations before pressing
ENTER
to enforce it. Pressing
CLEAR
can only
erase the operations not confirmed by pressing
ENTER
.
Note:
1)
Input/output channels are recognized in double-digits. I.E. press 01~09 instead of 1~9.
2)
The input delay time between two numbers of every input & output channel must be less than 8
seconds; otherwise the operation will be cancelled.
3)
The input/output channels on the rear panel count from left to right no whether or not there is a
signal card.
