Tekvox TEK MV71-4K 79064, Руководство пользователя

Страница: 18 / 49

18 / 49
Quadruple Windows
1) Use the “ ” button on the front panel or remote to set to the mode of quadruple windows. The
Video 1, 2, 3, and 4 button indicators on the front panel will light up.
2) HDMI output port outputs the mode of quadruple windows. Window 1 is configured to HDMI1 input
(HDMI1 is the factory default. If any changes are made,
use the last configuration); Window 2 is configured to
HDMI2 input (HDMI2 is the factory default. If any changes
are made, use the last configuration); Window 3 is
configured to HDMI3 input (HDMI3 is the factory default. If
any changes are made, use the last configuration);
Window 4 is configured to HDMI4 input (HDMI4 is the
factory default. If any changes are made, use the last
configuration). The windows are shown as follows:
3) If you want to switch to Window 1 switch the signal of DisplayPort5, use one of the following
methods:
Method 1: Press the INPUTS 5 button on the front panel or
remote, the Video 1 and 2 button indicators blink (indicates the
two buttons can be selected), press the Video 1 button on the
front panel or in the remote to select Window 1.
Method 2: Press the Video 1 button on the front panel or
remote, the 1 button indicator on the panel turns solid, 2~7 button
indicators are blinking (If an indicator is solid on, it means the source
currently selected; If an indicator is blinking, it means this source can be selected), press the INPUTS 1
button on the front panel or in the remote.
4) In the same methods, Window 2 can select DisplayPort6, and Window 3 can select RGB/YPbPr.
5) When the INPUTS indicators are off, the panel status is shown as follows.
6) HDMI output picture is changed to the following status.