Tekvox TEK MV71-4K 79064, Руководство пользователя

Страница: 17 / 49

17 / 49
Triple Windows
1) Use the “ ” button on the front panel or remote to set to the mode of triple windows. The Video 1, 2,
and 3 button indicators on the front panel will light up.
2) The HDMI output port outputs the mode of triple windows.
Window 1 is configured to HDMI1 input (HDMI1 is the
factory default. If any changes are made, use the last
configuration); Window 2 is configured to HDMI2 input
(HDMI2 is the factory default. If any changes are made,
use the last configuration). Window 3 is configured to
HDMI3 input (HDMI3 is the factory default. If any changes
are made, use the last configuration). The windows are
shown as follows:
3) If you want to switch to Window 1 and the DisplayPort5
signal:
Method 1: Press the INPUTS 5 button on the front panel
or remote. The Video 1 and 2 button indicators blink
(indicates the two buttons can be selected), press the
Video 1 button on the front panel or in the remote to
select Window 1.
Method 2: Press the Video 1 button on the front panel
or remote. The 1 button indicator on the panel turns solid on,
2~7 button indicators will blink (If an indicator is solid, it means the source currently selected. If an
indicator is blinking, it means this source can be selected), press the INPUTS 1 button on the front
panel or in the remote.
4) Using the same methods, Window 2 can select DisplayPort6 and Window 3 can select RGB/YPbPr.
5) When the INPUTS indicators are off, the panel status is shown as follows:
6) The HDMI output picture is changed to the following status.