Tekvox 79068, Руководство пользователя

Страница: 38 / 48

www.tekvox.com
PTZ Cameras
79068 User Manual
4.2.7.4 Version Upgrade
MCU version : V2.0.0.16 2015-12-18
Camera version : V2.0.0.16 2015-12-18
Focus version : V2.0.0.6 2015-12-11
Users only read the version information above which is consistent with the menu version but cannot
modify. Different types of the machine have different information.
Update file :
Click "Browse ..." installation, to select the upgrade file in the pop-up window.
Click on the "Upgrade" button, the upgrade dialog will appear. The device will reboot automatically
after successfully updating. (Note: make sure the power and network are keeping connected during
the process, or the upgrade will fail)
Note : After the version upgrade is complete, you will need to restore factory defaults; a, through web
to restore the factory default configuration; b, through the recovery menu; c, remote control shortcut
* # 6;
Choose one of the above three ways. If chose a, the IP accounts, passwords also need to be restored
to the default.
4.2.7.5 Restore Factory Settings
Click on pop-up "Restore Factory Defaults" button and choose “yes” or “no”, then the device will
restart automatically and restore factory settings.
4.2.7.6 Reboot
Click on the pop-up "Reboot" button and choose “yes” or “no”, then the device will restart
automatically
4.2.8 Logout
Point "Logout" pop-up "Confirmation" dialog; select "Yes" or "No", choose “Yes” to exit the current
page and return to the user login interface again.
4.2.9 Wireless Network
If the user's equipment has a wireless network module, Web page "Network Configuration" has
"Wireless Network" configuration page, then the specific configuration is as follows:
4.2.9.1 Network Settings
Wireless network configuration:
Network interface enable : can check, to set the following items after checked.
DHCP : can check, if check, it can obtain IP automatically.
IP address : set wireless WIFI IP (default 192.168.1.250, if checked DHCP, IP could be assigned
automatically)
Note : Wireless IP address cannot be in the same segment with wired IP address.