www.tekvox.com
PTZ Cameras
79068 User Manual
1.2 Powering On & Initial Configuration
13.
Power on
: Connect DC12V power supply adapter with power supply socket.
14.
Initial Configuration
: Power on with power indicator light on and remote control receiver light
blinking, camera head moves from bottom left to the bottom, and then goes to the HOME
position (intermediate position of both horizontal and vertical), while the camera module
stretches. When remote control receiver light stops blinking, the self-checking is finished
Note
: If you set preset 0, when Power on self-test is completed, the camera automatically
moves to the preset 0 position.
1.3 Video Output
This series has a variety of video output; HDMI models have video output from LAN, HDMI and 3G-
SDI, HDBT models from LAN and HDBaseT.
1.3.1 Video Output from LAN
Webpage Login
: Open your browser and enter 192.168.5.163 in the address bar (factory default);
press Enter to enter the login page; click on the “player is not installed, please download and install!"
and follow the installation steps for installation. Then enter the username admin and password
admin (factory default); press Enter to enter the preview page, users can carry out PTZ control, video
recording, playback, configuration and other operations.
1.3.2 HDMI Video Output
Connect the camera and the monitor via HDMII video cable; video output is available after camera
self-test.
1.3.3 3G-SDI Video Output
Connect the camera and the monitor via 3G-SDI video cable; video output is available after camera
self-test.
1.3.4 RJ-45 HDBaseT Video Output
Connect the device, HDBaseT signal-receiving device, and the display together properly through the
network cable and video cable. Image could be displayed after the device finish self-inspection.
HDBaseT signal receiving device: HDBaseT adapter box, input HDBaseT signal, output HDMI signal.
1.4 Bracket Mount
Note: Bracket can only be wall mounted or upside down mounted on template and concrete wall, but
cannot be installed on plasterboard.
