Tektronix WFM8200, Руководство по обслуживанию

Страница: 46 / 85

General Maintenance
Optional boards:
SDI input, for instruments without Option EYE or PHY
Eye, for Option EYE or PHY
Composite input, for Option CPS
Audio Main, for Option AD and DPE
Analog Audio, for Options AD and DPE
Dolby Decoder module, for Option DPE
NOTE.
Option DPE replaces Option DDE.
Table 4-3: Required test equipment
Test equipment Requirements Example
1080p 59.94 3 Gb/s HD signals required:
100% color bars
SDI Matrix Split Field Pathological
Signal
Tektronix TG700 with an HD3G7 module
(Embedded audio needed for audio
options)
1080i 59.94 HD signals required:
100% color bars
10 bit shallow ramp
SDI Matrix Split Field Pathological
Signal
100% sweep
Tektronix TG700 with HDVG7 module
(Embedded audio needed for audio
options)
525/270 SD signals required:
100% color bars
10 bit shallow ramp
SDI Matrix Pathological Signal
100% sweep
Tektronix TG700 with DVG7 module
(Embedded audio needed for audio
options)
SDI serial digital video test generator with
embedded audio and composite signal
source.
Varies with installed options:
SD - Need SD SDI source
HD - Need HD SDI source
3 Gb/s - Need 3 Gb/s SDI source
CPS - Need composite SDI source
Composite signals required for Option
CPS: NTSC SMPTE bars Tektronix TG700 with AVG7 module
XGA Monitor Computer monitor capable of 1024 x 768
x 60 Hz scan rate
AES Audio Signal Generator (If any audio
option installed) 48 kHz, 24 bit word length signals Rohde & Schwarz UPV, Tektronix AM700
and AM70.
Analog Audio Signal Generator (If any
audio option installed) Rohde & Schwarz UPV, Tektronix AM700
and AM70.
4–6 WFM8200 and WFM8300 Waveform Monitors Service Manual