Tektronix WFM8200, Руководство по обслуживанию

Страница: 20 / 85

Introduction
Hardware Installation
The instrument is shipped in a wrap-around chassis which covers the instrument
bottom and two sides. A cover is installed on the chassis, and the rear panel
is made up of the module rear panels. You can operate the waveform monitor
in the instrument chassis (the top cover must be installed, for safety and for
proper cooling), or installed in an approved portable cabinet or rack adapter.
You can also install the instrument in a custom installation, such as a console.
For installation instructions, refer to the
WFM8200 and WFM8300 Waveform
Monitors Installation and Safety Instructions or the Rack Adapter Instructions
included with your Tektronix rackmount kit.
Product Upgrade
Hardware and software upgrades are available for all products, either as a fi eld
upgrade kit or as a free software download from the Tektronix Web site. The
WFM8200 and WFM8300 Waveform Monitors User Manual includes instructions
for updating product software.
Operating Information
For operating instructions, refer to the WFM8200 and WFM8300 Waveform
Monitors User Manual . For more detailed reference information, refer to the
instrument Online help. (Press the Help button on the instrument front panel and
then use the General knob, up/down arrow keys, and SEL button to navigate
through the topics.)
Power-On Procedure 1. Connect the supplied power cord to the rear-panel power connector.
2. Press the power button on the instrument front-panel and the instrument will
turn on.
3. Wait for the system to complete its power-on self-tests.
NOTE.
The Standby button on the front-panel does not disconnect mains power.
Only the power cord at the rear of the product can disconnect mains power.
Power-Down Procedure
1. Press the power button on the instrument front-panel to turn the instrument off.
2. To remove power completely, disconnect the power cord from the rear-panel
of the instrument.
1–2 WFM8200 and WFM8300 Waveform Monitors Service Manual