Tektronix WFM601 Скачать руководство пользователя страница 3

Страница: 3 / 304

WARRANTY

Tektronix warrants that this product, that it manufactures and sells, will be free from defects in materials

and workmanship for a period of three (3) years from the date of shipment. If any such product proves defec-

tive during this warranty period, Tektronix, at its option, either will repair the defective product without

charge for parts and labor, or will provide a replacement in exchange for the defective product.

In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expi-

ration of the warranty period and make suitable arrangements for the performance of service. Customer

shall be responsible for packaging and shipping the defective product to the service center designated by

Tektronix, with shipping charges prepaid. Tektronix shall pay for the return of the product to Customer if

the shipment is to a location within the country in which the Tektronix service center is located. Customer

shall be responsible for paying all shipping charges, duties, taxes, and any other charges for products re-

turned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inade-

quate maintenance and care. Tektronix shall not be obligated to furnish service under this warranty a) to

repair damage resulting from attempts by personnel other than Tektronix representatives to install, repair

or service the product; b) to repair damage resulting from improper use or connection to incompatible

equipment; c) to repair any damage or malfunction caused by the use of non-Tektronix supplies; or d) to

service a product that has been modified or integrated with other products when the effect of such modifica-

tion or integration increases the time or difficulty of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THIS PRODUCT IN LIEU

OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED. TEKTRONIX AND ITS VEN-

DORS DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR

A PARTICULAR PURPOSE. TEKTRONIX’ RESPONSIBILITY TO REPAIR OR REPLACE DE-

FECTIVE PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE CUS-

TOMER FOR BREACH OF THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT

BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAM-

AGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS ADVANCE NO-

TICE OF THE POSSIBILITY OF SUCH DAMAGES.

Содержание WFM601

















































































































































































































































































































Результаты поиска

Содержание WFM601

Отзывы:

Похожие инструкции для WFM601

Бренды по названию

Популярные бренды

Tektronix WFM601, Руководство по обслуживанию

Результаты поиска

Содержание WFM601

Отзывы:

Похожие инструкции для WFM601

Бренды по названию

Популярные бренды