Tektronix TMS 600 SAB-C167 80C167, Инструкция по эксплуатации, Страница: 44 / 94

Specifications
3–2
TMS 600 SAB-C167 80C167 Microcontroller Support Instruction Manual
Probe Adapter Configuration
The probe adapter has one jumper that is used to select between multiplexed and
demultiplexed address modes. Figure 3–1 shows the MUX/DEMUX jumper
location on the probe adapter.
MUX/DEMUX
Jumper
Figure 3–1: Jumper locations on the probe adapter
Probe Adapter Specifications
These specifications are for a probe adapter connected between a compatible
Tektronix logic analyzer and a SUT. Table 3–1 shows the electrical requirements
the SUT must produce for the support to acquire correct data. Table 3–2 shows
the environmental specifications of the probe adapter. Table 3–3 shows the
certifications and compliances that apply to the probe adapter. Figure 3–2 shows
the dimensions of the probe adapter.
Table 3–1: Electrical specifications
Characteristics Requirements
Probe adapter power supply requirements
Voltage 90-265 VAC
Current 1.1 A maximum at 100 VAC
Frequency 47-63 Hz
Power 25 W maximum
SUT clock
Clock rate Maximum specified 20 MHz
Maximum tested: 5 MHz