iView Integrated Measurements
2.
Select the
fi
le name.
3.
Click
Open
.
4.
Click
Yes
when you are prompted to
con
fi
rm your actions.
iView Integrated Measurements
You can use the iView feature to connect an external Tektronix oscilloscope to the logic analyzer, acquire data from both
instruments, and display the results on the logic analyzer. This is useful for displaying the analog components of a signal in
the same data window as the digital components.
In the following examples the logic analyzer and the oscilloscope will acquire the same data. The logic analyzer captures
the digital components and the oscilloscope captures the analog components.
Use the following steps to set up the oscilloscope for these examples. Refer to the documentation that came with your
oscilloscope for operating instructions.
1.
Connect the oscilloscope probe to the same signal source as the logic analyzer (for this example, connect to the
Q output of the
fl
ip-
fl
op).
2.
Power on the oscilloscope.
3.
Press the
Default Setup
button on the oscilloscope, and then press the
Autoset
button. You should have a signal on
the oscilloscope screen.
Connecting the Logic Analyzer and the Oscilloscope
After completing the oscilloscope and logic analyzer setups, use the iView wizard to connect the two instruments together.
TLA Quick Start User Manual
29
