manualshive.com logo in svg

Tektronix TLA 704, Руководство по обслуживанию

Поделиться
Скачать
Tektronix TLA 704 Скачать руководство пользователя страница 47

Theory of Operation

TLA 704 Color Portable Mainframe Service Manual

3–3

trigger protocols and several custom features, including time interpolation to
support individual module applications.

The Interface Board interconnects the Controller Board, the flat-panel display,
the floppy disk drive, the front-panel keypad and glidepoint, and the external
mouse and keyboard ports. Dual 50-pin cables connect the Front Panel Interface
Board to the Controller Board. The Interface Board also supplies the PC speaker.

The Front Panel Controls Board combines signals from the front-panel hex
keypad, the front-panel QWERTY keypad, and an external keyboard to generate
or receive standard keyboard scan-codes from the Controller Board. Keys are
controlled via a 6805C processor. A second 6805C processor controls the five
front-panel knobs and the glidepoint.

The Mechanical Chassis provides the mechanical support structure for the
instrument, and includes the cooling system, the modular-card cage, the EMI
shielding system, and all the subsystems previously listed.

Front Panel

 Interface Board

Front Panel Controls

Board

Mechanical Chassis

Содержание TLA 704

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды