manualshive.com logo in svg

Tektronix TLA 704, Руководство по обслуживанию

Поделиться
Скачать
Tektronix TLA 704 Скачать руководство пользователя страница 12

TLA 704 Color Portable Mainframe Service Manual

vii

Service Safety Summary

Only qualified personnel should perform service procedures. Read this Service
Safety Summary and the General Safety Summary before performing any service
procedures.

Do Not Service Alone.

 Do not perform internal service or adjustments of this

product unless another person capable of rendering first aid and resuscitation is
present.

Disconnect Power.

 To avoid electric shock, disconnect the main power by means

of the power cord or, if provided, the power switch.

Use Care When Servicing With Power On.

 Dangerous voltages or currents may

exist in this product. Disconnect power, remove battery (if applicable), and
disconnect test leads before removing protective panels, soldering, or replacing
components.

To avoid electric shock, do not touch exposed connections.

Содержание TLA 704

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды