How to upgrade the instrument
fi
rmware
3.
Use the up (
▲
) or down (
▼
) arrow button to select
SYSTEM :
BACKUP/RESTORE
.
4.
Use the left (
◄
) or right (
►
) arrow button to select
Restore All User Data
From USB
, and then press the
ENTER
button.
CAUTION.
To prevent the loss of your user
fi
les, be sure to use the
Restore All
User Data from USB
option.
5.
In the overwrite con
fi
rmation display, press the
ENTER
button to perform
the selected restore function.
6.
During the restore process, progress messages are displayed. When the
message
Restore completed successfully
is displayed, press any button to
return to the SYSTEM menu display.
7.
Use the up (
▲
) or down (
▼
) arrow button to select
SYSTEM : USB
(Mounted)
.
8.
Press the
ENTER
button to safely unmount the USB device.
Troubleshoot the
fi
rmware upgrade
If a power failure occurs during the upgrade and the instrument has a blank screen
when you reapply power, perform the following procedure.
1.
Connect an Ethernet cable between the instrument and your computer or
local Ethernet network.
2.
Remove the power cable to turn off the instrument.
3.
Press and hold the STATUS button and then reconnect the power cable.
Continue to hold the STATUS button until the message
Select upgrade
network speed:
appears on the top line of the LCD display.
4.
Press the left (
◄
) or right (
►
) arrow button to select a network speed
(10BaseT, 100BaseT, or 1000BaseT), and then press the
ENTER
button.
If you do not know your network speed, the 100BaseT selection is
recommended.
SPG70UP Field Upgrade Instructions
23
