Tektronix RTX100A Скачать руководство пользователя страница 15

Страница: 15 / 160

RTX100A ISDB-T RF Signal Generator Service Manual

Environmental Considerations

This section provides information about the environmental impact of the

product.

Observe the following guidelines when recycling an instrument or component:

Equipment Recycling.

Production of this equipment required the extraction and

use of natural resources. The equipment may contain substances that could be

harmful to the environment or human health if improperly handled at the

product’s end of life. In order to avoid release of such substances into the

environment and to reduce the use of natural resources, we encourage you to

recycle this product in an appropriate system that will ensure that most of the

materials are reused or recycled appropriately.

The symbol shown to the left indicates that this product

complies with the European Union’s requirements

according to Directive 2002/96/EC on waste electrical and

electronic equipment (WEEE). For information about

recycling options, check the Support/Service section of the

Tektronix Web site (www.tektronix.com).

Mercury Nortification.

This product uses an LCD backlight lamp that contains

mercury. Disposal may be regulated due to environmental considerations. Please

contact your local authorities or, within the United States, the Electronics

Industries Alliance (www.eiae.org) for disposal or recycling information.

This product has been classified as Monitoring and Control equipment, and is

outside the scope of the 2002/95/EC RoHS Directive. This product is known to

contain lead, cadmium, mercury, and hexavalent chromium.

Product End-of-Life

Handling

Restriction of Hazardous

Substances

Содержание RTX100A

































































































































































Результаты поиска

Содержание RTX100A

Отзывы:

Бренды по названию

Популярные бренды

Tektronix RTX100A, Руководство по обслуживанию

Результаты поиска

Содержание RTX100A

Отзывы:

Бренды по названию

Популярные бренды