Tektronix P6562A, Инструкция по эксплуатации

Страница: 6 / 16

Accessories and Operation
3
P6562A Instructions
Right Angle
Adapter
Right-angle adapter — Use the right-angle
adapter to probe boards with 0.025-inch diameter
square pins; for example, on micro-computer and
communications backplanes.
Signal-Ground
Lead
Signal-Ground lead — Use the signal-ground
lead to substantially reduce ground lead
inductance. Because the ground lead simply
touches the ground reference (instead of clipping
onto it), you can easily move the probe to different
points on the device under test.
Signal-Ground
Lead Ring
To attach the signal-ground lead, gently slide the
boot back to expose the probe’s metal sleeve.
Slide the metal ring of the signal-ground lead over
the probe tip onto the probe’s metal sleeve. Push
the boot back up to cover both the metal sleeve
and metal ring.
SureFoot
R
— The SureFoot tip is an integral
probe tip and miniature guide that enables
fault-free probing of fine-pitch SMD packages.
The .025 SureFoot tip is designed to be
compatible with JEDEC 25 mil packages.
Short Ground blade
— Use the short ground
blade with the SureFoot tip for probing ease and
improved signal fidelity. To use it, form a ground
plane of copper clad on the top of the IC to be
probed. Attach short jumper wires from the
device ground to the copper clad. With the
SureFoot tip installed, rest the short ground blade
on the ground plane while probing the IC.
Installing SureFoot
— Install the short ground
blade using the same method as the signal-
ground lead. The SureFoot tip is pressed into the
probe head in place of the standard push–in tip.