Section 7: TSP command reference
Models 707B and 708B Switching Matrix Reference Manual
7-220
707B-901-01 Rev. B / January 2015
Example
tsplink.trigger[2].clear()
Clears trigger event on synchronization line 2.
Also see
(on page 7-220)
(on page 7-222)
(on page 7-224)
(on page 7-225)
tsplink.trigger[N].EVENT_ID
This constant identifies the number that is used for the trigger events.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Constant
Yes
Usage
eventID
= tsplink.trigger[
N
].EVENT_ID
eventID
The trigger event number
N
The trigger line (1 to 3)
Details
This number is used by the TSP-Link trigger line when it detects an input trigger.
Set the stimulus of any trigger object to the value of this constant to have the trigger object respond to
trigger events from this line.
Example
trigger.timer[1].stimulus = tsplink.trigger[2].EVENT_ID
Sets the trigger stimulus
of trigger timer 1 to the
TSP-Link trigger 2 event.
Also see
None
tsplink.trigger[N].mode
This attribute defines the trigger operation and detection mode.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Instrument reset
Recall setup
TSP-Link trigger N reset
Create
configuration script
0 (tsplink.TRIG_BYPASS)
Usage
mode
= tsplink.trigger[
N
].mode
tsplink.trigger[
N
].mode =
mode
mode
The trigger mode
N
The trigger line (1 to 3)